#hiring *Maintenance Technician III (Millwright)*, San Diego, *United States*, fulltime #jobs #jobseekers #careers #SanDiegojobs #Californiajobs #Engineering *Apply*: https://lnkd.in/dqhsQ_du Job Description Pay Rate: $50.00 to $55.00, Per Hour. BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Consistently leads an assigned team to inspect, maintain, repair and install mechanical, electromechanical, pneumatic and/or hydraulic equipment at plant and/or pump stations. Primary Duties/Responsibilities: In conjunction with supervisor, or in his/her absence, reviews daily team requirements. Oversees work assignments to ensure that schedules are met. May recommend changes to schedule to optimize production and/or reduce costs. Ensures that labor reporting is accurate and balances with labor tracking system. Provides feedback to Supervisor on labor, material and equipment demands needed to achieve schedule. Involved in inspection, diagnosis, troubleshooting, scheduled/preventative maintenance, repair, and servicing of plant, shop, and field equipment/components. Fabricate, weld, and fasten metals, plastics, composites using a wide range of milling, drilling and boring machinery. Prepares work orders either manually or from a Computer Maintenance Management System as required and prepares work related reports, procurement requisitions, charts, graphs and data submittal requirements in an accurate and timely manner. Models safe work practices and provides leadership in achieving safety goals. May assist with safety training. Ensures that safety awareness is on going, that good housekeeping is practiced and that environmental and safety regulatory requirements are met. Reports potential problems to supervisor on a timely basis. Ensure plan, specification, code, standards, guidelines, and methodology compliance. May assist in other duties of the facility as needed Work Environment: Spends 100% of the time in operations environment. Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. Company service vehicles are used as required. Travels 1 - 2 times per year for company provided training. May serve rotational 24 hour emergency on-call. Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards
San Diego Jobs’ Post
More Relevant Posts
-
Senior Business, HR & Recruiting Partner - Temp to Hire, Direct Hire and Human Resource Management Solutions
Hiring (Oxnard CA) Maintenance Electro Mechanic The Maintenance Electro Mechanic performs maintenance activities in a safe manner while ensuring product safety. A Maintenance Electro Mechanic is responsible for working in a safe and professional manner including following lockout – tagout procedures. Perform preventive maintenance procedures on all types of production equipment. Perform all types of troubleshooting and repairs of production equipment without direct supervision. Make equipment modifications as needed to improve safety and productivity. Train other maintenance team members as needed. Assist set-up personnel and machine operators as needed. Maintenance Lead Perform diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, preventive and productive maintenance systems and processes to support the achievement of the plant business goals and objectives. Maintain and improve facilities. Tool Room Manager Provide leadership, organization, and technical support that will result in; employee safety, the attainment of production goals and product safety. Lead and manage tooling maintenance, preparation, repair and development. This requires a strong practical knowledge of thermoforming and tooling principles and practices. Leadership, teamwork and support of other employees are essential for meeting team and plant goals in production, quality, and product and employee safety. Plant Manager Manage, direct, and coordinate overall production operations to meet established goals in safety, quality, cost, and customer service. Duties and Responsibilities: 1. Implement a safety culture and reduce workplace injuries through training and establishing safe work standards. 2. Standardize manufacturing methodologies and processes through the development and implementation of Best Practices and assure effectiveness through training and auditing. 3. Drive continuous improvement through the identification and successful implementation of projects focused on improving bottom-line performance of the manufacturing department. 4. Ensure that the responsibilities, authorities, and accountability of all direct reports are defined and understood. 5. Monitor production metrics (run efficiency, uptime, scrap rates, and machine utilization) and ensure they maintain or exceed established goals. Implement strategies to improve production operations in order to achieve these goals. 6. Coordinate the execution of production schedules based on sales requirements and plant capacity. 7. Confer with subordinates and other plant personnel to comply with federal, state, and local safety standards as well as those established by the company. 8. Perform managerial duties related to personnel decisions, including, but not limited to, writing and conducting performance evaluations, hiring, disciplinary and termination decisions, and work assignments.
-
-
💥 Let's talk pain points. In my conversations with clients, a recurring challenge emerges: the struggle to source qualified individuals for their Maintenance vacancies. Within the Industrial domain, it's evident that Maintenance Technicians aren't one-size-fits-all. The nuanced demands of various industries necessitate distinct skill sets. A Food and Beverage Maintenance Technician, for instance, possesses a vastly different skill set compared to their counterpart in Plastics Maintenance. Moreover, the disparities extend across Manufacturing, Production, and Logistics environments. That's where I come in 😎 . You want a Tech with heavy electrical and PLC knowledge with a background in Food and Bev? I got him. Looking for a skilled Tech with expert knowledge in conveyor systems and automation, and experience in a Manufacturing setting? Look no further – meet Alex! CNC Maintenance? Yep. Heavy electrical experience? Yep Hydraulics, Pneumatics, Boilers, Pumps, Etc? Uh-huh. Them too. Just give me your shopping list, sit back, and let my team do the ground work. 💪 Remember, interviews are complimentary 💃 How can we help you today? #DFWRecruitment #MaintenanceStaffing #HiringSolutions #Randstadusa
-
Mechanical Technician Static and Rotary equipments Experience in equipment maintenance, maintenance & repair, and industrial maintenance Ability to troubleshoot and diagnose equipment malfunctions Experience in preventive maintenance, including developing and following attention to detail interpersonal skills maintenance schedules Strong problem-solving skills and Ability to work effectively in a team environment Excellent communication
-
Realiability and Maintenance Specialist in Oil an Gas Industry.AI-ML application consultant in Predictive MIntenance.
Maintenance of Equipment used in Oil and Gas Industry need following Skilled Manpower better known as 1.Fitters 2.Riggers 3.Mill Wright Fitters 4.Machinists 5.Technicians 6.Helpers Generally it has been seen only few have Diploma certificates in Engineering and majority of them do not have technical certifications like 1.ITI certificate 2.Not any Scientific School Certificate. Most of practicing manpower including 1.Fabricator 2.Welder 3.Scaffolder do not have formal technical education and have only experience which in some cases very relevant in Industry. However in my view Good Technical Hands come only from Certified Diploma Engineers and they need to be given chances and training to work on Roatating as well Static equipment and must be exposed 1.Best Practices 2.Best written repair, assembly procedures In specialized Machinery like critical big Machines like 1.Compressors 2.Pumps 3.Steam and Gasturbines The skilled manpower must be given consistent training along with responsible Maintenance and Reliability Engineers. Actually nobody can replace good technicians whose work is perfect and no rework is required in general. However Maintenance Engineers/Reliability Engineers must ensure 1.Proper and Special Tools and Tackles. 2.Spare Parts/ Material 3.Encouraging innovation in Repair as well Encouraging to learn from every Mchinery failure. 4.Logistics NOTE:All this is about Mechanical Discipline.Same applies to Electrical,Instrumentation discipline for Maintenance. #maintenance #failure #reliability #spareparts #oilandgas #pumps #steamturbines #gasturbines #compressors
-
