The refresh, or Highland Model 3 began with engineering test vehicles being spotted near Giga Texas and the Fremont factory in California. Similarly, this covered-up Model Y was spotted near Pasadena, California.
Given the timelines we saw for the new Model 3, this prototype for the Model Y appears to be following a trajectory for an early to mid-2025 launch. Engineering test vehicles for the new Model 3 were first spotted in North America about 6-8 months prior to its introduction to China. After its initial release in Chinese, the vehicle was later released in North America just a few months later.
If timelines for Project Juniper are similar to what we saw for the Model 3, we should expect to see more engineering test vehicles on the road in North America soon.
The vehicle is expected to be released in China first, with a North American and European arrival following sometime after. While the Performance variant of the new Model 3 didn’t launch until April of 2024, several months after the Long Range version was available in North America, it’s not clear whether Tesla will follow a similar strategy and launch the Long Range version of the new Model Y before the Performance model.
Front Bumper Camera
There was a lot of speculation about the refreshed Model 3 coming with a front bumper camera, but so far the Cybertruck is the only Tesla vehicle that includes a bumper camera and a camera washer (video). While updated versions of the Model S and Model X are also expected to add the lower-bumper camera, so also have yet to go on sale as well.
It’s not clear why Tesla didn’t launch the new camera with the new Model 3 since the bumper was already being redesigned and the factories were being retooled. However, according to the spy shot of the updated Model Y, it looks like it could be Tesla’s second vehicle to include the bumper camera. TeslaNewswire shared a photo of the Model Y with the brightness increased which appears to reveal the new front bumper camera. The location is exactly where you’d expect, very similar to the Cybertruck and similar to early shots of the prototype Model 3 that also contained the bumper camera.
It’s not clear whether this additional camera will make it into the production version, but it’s at least a sign that Tesla is considering adding this camera to another model.
Musk Asks People to Stop
Elon Musk replied to Sawyer Merritt on X (Twitter), not only reiterating that the refreshed Model Y will not be released this year. He also asked people to stop hinting that it will be since it damages Tesla’s sales of the current vehicle.
Musk reiterates that the new Model Y will not launch in 2024
kylaschwaberow/X
Potential Upgrades
While the release of the new Model Y may be about a year out in North America – there is a chance that the updated Model Y Juniper could show up with Hardware 5 sensors and computers. Elon Musk estimated that HW5, now dubbed AI5 was about 12-18 months away from production. The new Model Y could be the vehicle that debuts the new FSD package.
Of course, all of the rest of the upgrades that came with the updated Model 3 will all likely come to the Model Y – a new front and rear fascia, new adaptive headlights, increased range, ambient lighting, new colors, new speakers, and better dynamics in general. Package all of that up with what was already the best-selling car in 2023, and we’ve got a hit on our hands.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
In Tesla software update 2024.32 and onwards, Tesla has made a big—and unexpected—change to how its vehicles handle power sockets. This change impacts every vehicle except the Cybertruck, where you can already adjust how power sockets are handled on a case-by-case basis.
Power Socket Change
This change to the power sockets means that in 2024.32, Tesla vehicles will have their 12v sockets and USB ports turned off while in Sentry Mode. Previously, while the car was awake or Sentry Mode was active, the 12v sockets in the rear of the vehicle and any of the USB ports would all remain powered.
Now, owners will no longer be able to operate devices that rely on these ports once the vehicle falls asleep. This change renders some accessories almost useless, such as vehicle fridges. Owners previously relied on Sentry Mode coming on when their vehicle was parked, which kept the fridge in the vehicle’s sub-trunk powered. This change will also prevent owners from using Sentry Mode to keep USB ports powered to charge laptops and other devices.
Until further changes are made, owners will have to use Camp Mode to keep 12v sockets and USB ports powered. However, Camp Mode leaves the vehicle unlocked, making it insecure and unsuitable for things like sub-trunk fridges.
Cybertruck Power Interface
Tesla may be planning to integrate the Outlets & Accessories menu from the Cybertruck into the rest of its vehicles. The outlets menu in the Cybertruck allows you to keep the cabin (and bed) outlets in the vehicle active, even when the vehicle isn’t in use. These outlets remain powered for up to 12 hours after the Cybertruck is exited.
The Power Menu in the Cybertruck
Not a Tesla App
Sentry Mode Improvements
Drew Baglino, Tesla’s now former SVP of powertrains and energy, said back in February of this year that Tesla was looking at reducing the amount of power that Sentry Mode used. He stated that Sentry Mode power consumption needs to be improved and that the team was working on an update to reduce power by about 40%. According to Baglino, the improvements were expected to come in the second quarter of this year, but it’s not clear if this change in update 2024.32 is part of those changes that will lower Sentry Mode’s power consumption.
Even if these are planned changes, we hope Tesla makes them optional, and lets owners choose when to keep outlets powered and when to conserve energy.
Tesla has issued an OTA recall for the Cybertruck – unsurprisingly, one that has already been fixed for customer vehicles. We’ll expand on the recall a little later, but more importantly, the recall filing revealed that Tesla has now built and sold 27,185 Foundation-Series Cybertrucks for customers.
OTA Recall
The OTA recall – which was issued in update 2024.32.5.2 and above, covered an issue that could delay the rearview camera being displayed on the dashboard.
This would occur if the Cybertruck was powered on, and then quickly shifted to reverse. The rearview camera would not come up on screen within the prescribed 2-second timeframe.
According to the NHTSA filing, Tesla has already fixed this via the OTA update, and the rearview camera will now display within that 2-second timeframe as required going forward. This was another easy OTA fix for Tesla.
Not a Tesla App
27k Cybertrucks
The filing also revealed that Tesla has produced and delivered approximately 27 thousand Foundation-Series Cybertrucks through September 14th. Tesla has been producing the Cybertruck for approximately 11 months now, with the 12-month anniversary coming up on November 13th.
Elon Musk previously mentioned that Tesla intends to produce approximately 375,000 trucks per year to compete with the ICE pickup market. Today, Tesla produces 1.7 million Model 3 and Model Y vehicles per year, and about 80,000 Model S and Model X vehicles a year.
Overall, that 27 thousand over a year is only the start of production, and as Tesla expands and improves its production lines, we can expect that number to continue growing at a rapid pace. With the Foundation Series ending and Tesla opening up invites for reservation holders to configure their non-FS Cybertruck, that number is only expected to increase. The non-FS Cybertruck is priced at $79,990, $20k less than the Foundation Series. The Cybertruck will also become eligible for the Canadian iZEV Heavy EV Rebate.
This puts the Cybertruck in an excellent spot in the future—and it has already outsold its EV competitors in the same market. We’re looking forward to seeing how fast Tesla meets the upcoming demand for non-Foundation Series Cybertrucks.
