Thermaltake Toughpower GF3 850W ATX v3.0 Power Supply Review

The Thermaltake Toughpower GF3 850W is one of the first ATX v3.0 compatible PSUs.

Thermaltake GF3 850W ATX v3.0
(Image: © Thermaltake)

Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

Performance Rating

(Image credit: Tom's Hardware)

The GF3 850 achieves good performance, but the Corsair RM850x and the EVGA 850 G7 are far ahead. 

Noise Rating

The graph below depicts the cooling fan's average noise over the PSU's operating range, with an ambient temperature between 30 to 32 degrees Celsius (86 to 89.6 degrees Fahrenheit).

(Image credit: Tom's Hardware)

Under normal operating temperatures, the average noise output is below 30 dBA. With lower noise at high loads, it could be close to 25 dBA. 

Efficiency Rating

The following graph shows the PSU's average efficiency throughout its operating range with an ambient temperature close to 30 degrees Celsius.

(Image credit: Tom's Hardware)

Average efficiency should be higher, above 88%, at least. 

Power Factor Rating

The following graphs show the PSU's average power factor reading throughout its operating range with an ambient temperature close to 30 degrees Celsius and 115V/230V voltage input. 

The APFC converter registers good performance. 

MORE: Best Power Supplies

MORE: How We Test Power Supplies

MORE: All Power Supply Content

Aris Mpitziopoulos
Contributing Editor

Aris Mpitziopoulos is a contributing editor at Tom's Hardware, covering PSUs.