ER-MIMU-09 North-Seeking MEMS IMU for Gyro Tools
Introduction
Inertial Measurement Unit, referred to as IMU, is a device to measure the attitude angle (or angular velocity) and acceleration of the three axis of the object. Gyroscope and accelerometer are the core devices of inertial navigation system (INS). With the built-in accelerometer sensor and gyroscope, the IMU can measure the linear acceleration and rotation angular velocity from three directions and can obtain the attitude, velocity and displacement information of the carrier through the resolving.
ER-MIMU-09 uses MEMS accelerometer and gyroscope with high quality and reliability, RS422 and external communication, baud rate can be flexibly set between 230400~921600, through the communication protocol to set the user's required communication baud rate. With X, Y, Z three-axis precision gyro, X, Y, Z three-axis accelerometer with high resolution, can be output by RS422 X, Y, Z three axis of gyroscope and accelerometer 's original hexadecimal complement data (including gyro hexadecimal complement the numerical temperature, angle, the accelerometer hexadecimal temperature, the acceleration hexadecimal complement number); It can also output float dimensionless values of the gyroscope and accelerometer processed by the underlying calculation.
Features
Volume:120mm x Φ30mm
Light weight: ≤70g
6V power supply, low power consumption 2W
Products include X, Y, Z three axis MEMS gyro and X, Y, Z three axis MEMS accelerometer
RS422 bus communication, baud rate from 230400~921600 can be set
Application
North seeking in logging tools/gyro tools
Pointing, steering and guiding in advanced mining/drilling equipment
Initial alignment/UAV launch systems
Direction pointing and tracking in satellite antenna, target tracking system
Guidance and navigation in navigation grade MEMS system
Orientating and positioning in railway train system
Precision platform attitude measuring and controls
Precision attitude, position measuring in navigation grade MEMS IMU/INS
North finding and positioning in land surveying/land mobile mapping system
Specifications
Item | ER-MIMU-09A | ER-MIMU-09B | ER-MIMU-09C | ER-MIMU-09H |
Gyro performance | ||||
Range | 50deg/s | 100deg/s | 200deg/s | 100deg/s |
Bandwidth (-3dB) | 12Hz | 12Hz | 12Hz | 12Hz |
Scale Factor at 25°C | 160000LSB/(deg/s) | 80000LSB/(deg/s) | 40000LSB/(deg/s) | 80000LSB/(deg/s) |
Scale Factor Repeatability (1σ) | <50ppm | <50ppm | <100ppm | <100ppm |
Scale Factor VS Temperature (1σ) | 300ppm | 300ppm | 300ppm | 500ppm |
Scale Factor Non-Linearity (1σ) | <200ppm | <200ppm | <300ppm | <300ppm |
Bias Instability | <0.01deg/hr | <0.02deg/hr | <0.02deg/hr | <0.02deg/hr |
Bias stability (10s 1σ) | <0.05deg/hr | <0.1deg/hr | <0.1deg/hr | <0.1deg/hr |
Angular Random Walk | <0.0025°/√h | <0.005°/√h | <0.005°/√h | <0.025°/√h |
Bias error over temperature (1σ) | 3deg/hr | 3deg/hr | 5deg/hr | 3deg/hr |
Bias temperature variations, calibrated (1σ) | <0.1deg/hr | <0.3deg/hr | <0.5deg/hr | <0.3deg/hr |
Bias Run-Run (1σ) | <0.1deg/hr | <0.1deg/hr | <0.1deg/hr | <0.1deg/hr |
Accelerometer performance | ||||
Range | 10-30g | |||
Bandwidth | 100Hz | |||
Bias Stability (1s)(1σ) | ≤0.05mg | |||
Bias Repeatability | ≤0.1mg | |||
Bias Temp Coefficient | <10ug/℃ | |||
Bias Temp Hysteresis | <0.5mg | |||
Scale Factor Non-linearity | <500ppm | |||
Scale Factor Repeatability | ≤30ppm | |||
Scale Factor Temp Coefficient | 10ppm/℃ | |||
Class II Non-linearity Coefficient | <100ug/g2 | |||
Scale Factor | 400000-800000μg/LSB | |||
System Performance | ||||
Supply Voltage | 6~12V | |||
Supply Consumption | 2W | |||
Interface | RS422 | |||
Vibration | 6.06g (10~2000Hz) | |||
Shock | 5000g, 0.1ms | |||
Operate Temp | -40℃~ + 80℃ | -40℃~ + 125℃ | ||
Storage Temp | -55℃~ + 105℃ | -55℃~ + 125℃ | ||
Weight | ≤150g | |||
Size | 120 mm x φ30 |
Application Techniques
1.IMU working principle & Tactical grade IMU product recommendations
3.Choosing an IMU: FOG IMUs vs MEMS IMUs
4.Application of IMU in the Field of Drones
5.What is the Difference Between IMU and AHRS?