PVT4EU

🚀 Exciting News: Launching the LinkedIn Page for PVT4EU Research Project! 🌞 Thrilled to announce the official launch of the LinkedIn page for the groundbreaking PVT4EU research project! 🌍☀️ 🔍 About PVT4EU: PVT4EU is on a mission to pioneer cutting-edge hybrid photovoltaic/thermal collectors tailored for low-temperature applications. As the energy landscape evolves, our consortium of 6 partners is committed to advancing sustainable solutions that bridge the gap between photovoltaics and thermal technologies. This project has been granted by the Joint Call 2023 of the Clean Energy Transition Partnership Initiative. 🤝 Meet the Consortium 🇸🇪 MG Sustainable Engineering (Sweden) 🇸🇪 Solarus Renewables (Sweden)  🇸🇪 SolarPeak (Sweden) 🇸🇪 University of Gävle (Sweden) 🇵🇹 LNEG National Laboratory of Energy and Geology (Portugal)  🇩🇰 DTU - Technical University of Denmark (Denmark) 🌟 Why Follow PVT4EU on LinkedIn? • Stay updated on groundbreaking research developments. • Gain insights into the future of hybrid photovoltaic/thermal technology. • Connect with experts and professionals shaping the renewable energy landscape. • Be part of future workshops. 📆 Save the Date: Join us on this incredible journey towards sustainable energy solutions! Follow our LinkedIn page and mark your calendars for updates, insights, and collaborative opportunities. Let's drive innovation and make a positive impact together! 🌐💡 #PVT4EU #RenewableEnergy #Innovation #Sustainability #CleanTech #ResearchProject #SolarEnergy #LinkedInLaunch

🚀 Excited to share the progress on Task 1.3 within WP1-Thermal management strategies for PVT4EU Technologies. The experienced team at LNEG - Laboratorio de Energia -the leader of the task, has successfully completed the assessment and selection of nanofluid-based heat transfer fluids for thermal enhancement of PVT collectors. Within this task, different combinations of base fluids and nanoparticles (see Figure), used in previous research studies, have been assessed for use with the PVT collectors developed by the PVT4EU project, with emphasis on their thermal properties, stability and preparation methods. Two nanofluids have been selected for further experimental analysis: Multi-Walled Carbon Nanotubes/water and Al2O3/water, with the aim of using them as heat transfer fluid during the PVT collector prototypes’ experimental testing campaign to be performed by LNEG in 2025/2026.  Figure: a) Nanoparticle types and b) different types of base fluids. 🔔Stay tuned for more updates as we continue our journey toward innovation and excellence! #PVT4EU #SolarEnergy #Innovation #RenewableEnergy #IndustrialApplications #Sustainability #CleanEnergy

🌞 Exciting developments at #EUROSUN2024! 🌞 The PVT4EU project was proudly represented by MG Sustainable Engineering and the University of Gävle, showcasing the consortium’s commitment to advancing Photovoltaic-Thermal (PVT) technologies. As PVT technologies gain significant momentum in recent years, the PVT4EU project is at the forefront of driving innovation, developing cutting-edge solutions, and analyzing their practical applications. Abel Climente García presented our innovative approach to mechanical design optimization for PV panel retrofitting, leveraging CFD simulations to enhance performance. Meanwhile, Damu Murali demonstrated the promising techno-economic performance of these solutions through advanced TRNSYS modeling. Antonio Arto Delgado, Juan Pablo Santana González, Alessandra Paladino, Ivan Acosta Pazmiño and others performed this work jointly. The conference was a fantastic platform for sharing these preliminary results and receiving invaluable feedback and insights from industry experts, researchers, and stakeholders. It was also a unique opportunity to connect with other projects and explore potential collaborations, driving synergies that can accelerate the development and deployment of PVT technologies across Europe. Such interactions are crucial as we continue to push the boundaries of PVT technology, ensuring it plays a key role in the sustainable energy landscape of the future. Thank you to everyone who engaged with us and contributed to this dialogue. Let’s keep the momentum going and drive the future of renewable energy together! 🚀🔋 #Sustainability #RenewableEnergy #PVT4EU #Innovation #CleanEnergy #GreenTech #CFD #TRNSYS #EnergyEfficiency

💡The WP4 team of the PVT4EU project, under the leadership of DTU - Technical University of Denmark, continues to make significant strides in advancing the performance and robustness of our collector prototypes. We’re thrilled to announce the installation of the Solarus concentrating PVT collector at DTU’s cutting-edge test facilities. Our team is now focused on designing and installing precision measurement equipment, which will enable us to conduct in-depth analysis and performance evaluation of the panel. This work, supported by the PVT4EU project, will drive enhancements to the Solarus collector, ensuring it can operate efficiently and safely in industrial applications at temperatures up to 140°C. We’re excited about the potential of this technology to revolutionize the sector. 🔔Stay tuned for more updates as we continue our journey toward innovation and excellence! 📷Image: Solarus concentrating PVT collector at DTU’s cutting-edge test facilities (the photo was taken by Mark Dannemand) #PVT4EU #SolarEnergy #Innovation #RenewableEnergy #IndustrialApplications #Sustainability #CleanEnergy

📯We are thrilled to share the “Report on PVT4EU eco-design recommendations,” one of the project's public deliverables within the WP3: “Synergic thermal and electrical design of PVT4EU technologies”.  The deliverable was jointly developed by Solarus Renewables AB, SolarPeak AB and MG Sustainable Engineering. ♻️This report is a thorough guide to making PVT technologies more environmentally friendly and energy-efficient, thus lowering their environmental footprint and improving energy usage. It focuses on eco-design concepts and recommendations, emphasising Material Selection, Reparability, Recyclability, and Circular Economy principles. These recommendations underscore the importance of choosing materials with minimal environmental impact, designing products for ease of repair, ensuring they are readily recyclable, and embracing principles of circularity to minimise waste and maximise resource efficiency. Lastly, the report introduces energy and environmental labels that can validate the actions taken during the conception phase, ensuring quality and facilitating easy customer comparison between products. 🔆Embracing ecodesign in product development ensures that technologies like solar energy systems are eco-friendly from start to finish. By integrating environmental considerations into every stage—from conception to disposal—we maximize sustainability, boost recyclability, and minimize environmental impact. Prioritizing ecodesign not only ensures compliance and enhances reputation but also contributes to a healthier planet. 🌐 You can download and read the report: https://lnkd.in/gs4v9gYN #PVT #LCA #Ecodesign #Solartechnology #Sustainability #Innovation

🌟 Excited to share progress on WP4 - PVT4EU Technologies Conceptualization, Testing, and Validation, led by the talented team at DTU - Technical University of Denmark! We have successfully installed a standard photovoltaic (PV) panel at DTU’s state-of-the-art testing facilities. This installation is unique because the SolarPeak retrofit thermal absorber prototype is mounted behind the PV panel, effectively transforming it into a retrofitted PVT solar collector. Our initial measurements of both electrical and thermal yield are currently underway. We’re eager to validate the concept of enhancing standard PV panels with a thermal absorber. Testing will include inlet temperatures ranging from -10°C to 30°C, simulating conditions as a source for a water-water heat pump. In the upcoming phase, we’ll collect data following ISO 9806 standards to assess the thermal performance of this retrofitted solution and explore opportunities for design improvements. 🔔 Stay tuned for more updates! 📷 Image: PV panel at DTU’s state-of-the-art testing facilities (the photo was taken by Mark Dannemand) #PVT4EU #SolarTechnology #RenewableEnergy #Innovation #Sustainability #PVPanels #ThermalPerformance #DTU

Let’s introduce the PVT4EU project team member! 👨🔬 Meet Ivan Acosta Pazmiño: 📍Head of Engineering at MG Sustainable Engineering AB, Sweden Ivan is experienced in the field of solar energy technologies, constantly exploring new methods to harness and optimize solar energy for various applications. As a member of the PVT4EU project, he is the Project Coordinator and Technical Leader of  MG Sustainable Engineering team. 📚 Beyond the Office: Ivan is a dynamic person who finds joy in the physical challenge of running, the strategic intrigue of poker, and the intellectual enrichment of reading.  Let's applaud Ivan Acosta Pazmiño and the entire MG Sustainable Engineering team for their strong dedication to shaping a sustainable and greener future! ✨ #PVT4EU #Innovation #Sustainability #MGSustainableEngineering

Let’s introduce the PVT4EU project team member! 👨🔬 Meet João Cardoso: 📍Technical Officer at the Renewable Energy and Energy Efficiency Unit, at LNEG, Portugal João is experienced in solar thermal collectors and applications, including solar heating and cooling, solar heat integration in industrial processes and concentrating solar power. As a member of the PVT4EU project, he will be in charge of the optical performance evaluation of concentrating PVT collectors, modelling and simulation of PVT systems integrated into buildings and industrial energy systems. 📚 Beyond the LAB:  João is a sport and nature enthusiast and likes to be active in playing tennis, hiking and swimming. He invests time in reading history books to understand how historical events have shaped the present world. Let's applaud João for his work on the transition to a sustainable energy future! 👏✨ #PVT4EU #Innovation #Sustainability #LNEG

Let’s introduce the PVT4EU project team member! 👨🔬 Meet Gintare Vilke: 📍D&C Officer at MG Sustainable Engineering AB, Sweden Gintare specialises in dissemination and communication with a strong background in Thermal Energy Systems and Energy Efficiency. As a member of the PVT4EU project, she is responsible for administrative tasks and D&C activities to promote the results and benefits of the project. 📚 Beyond the Office: Gintare is an enthusiastic and energetic individual who enjoys outdoor pursuits such as long walks, hiking, biking, and skiing. When she's not exploring the outdoors, she likes to unwind by reading books and engaging in handcrafting.  Let's applaud Gintare for her dedication to making our project reachable to the audience! 👏✨ #PVT4EU #Innovation #Sustainability #MGSustainableEngineering

🎉 Let’s celebrate EUROPEAN SOLAR DAY on 21st June 2024 right after the Summer Solstice day -  the day when daylight lasts the longest, and the night is the shortest, with the Sun reaching its highest point in the sky. This day is ideal for solar technologies to operate at their peak efficiency, providing maximum energy to millions of people in Europe and globally. 🌝Embrace solar energy for a brighter and more sustainable future!! 🎥 Watch the video “Solar thermal energy in buildings, cities and industries” and read more facts about solar thermal: https://lnkd.in/eNrdmmi8 Image: Solar Heat Europe #PVT #Solartechnology #Sustainability #Innovation #RenewableEnergy